SHENZHEN BAO YE HENG CO., LTD

DSP1200 Digital Amplifier

Features of DSP digital amplifier

*2×2 DSP processing module 24BIT 48KHZ sampling rate 32 bit DSP chip processing

*1 factory preset 32 preset modes for user memories

*With USB and RS485 remote control port

*ID can be set separately in the software and hardware, a maximum of 254 machines can be cascaded

*Independent file preservation preset, upload and download function of complete machine data

*Modes of stereo, bridge, parallel connection and crossover are optional

*Built-in signal generator, output of the sine wave and pink noise, white noise signal is used for system testing

*Data can be copied between channels, functional even at off-line state

DSP1200 DSP Function

*10 band EQ Q value is optional from 0.1 to 128, ±12dB adjustable, optional EQ types, BYPASS for each band

*High-pass and low-pass filter: open choices of frequency, slope: -6- -48dB

*Limiter: threshold 0--90dB compression ratio 1:1-1:20 optional

*start-up time: 1ms-200ms release time: 1ms-1s Delay: 0-1360ms

*Noise gate: -90.0dB-0dB start-up time: 1ms-200ms release time: 1ms-1s

*Phase: 0/180°

*With function of bridge and parallel connection

Specifications of digital amplifier DSP1200

Output power 8Ω/1KHz：2×300W RMS

4Ω/1KHz：2×550W RMS

Bridged power 8Ω/1KHz：700W RMS

Input sensitivity：0dB

Input impedance balance imbalance

Frequency response：20Hz-20KHz@8Ω

THD：0.01%（1KHz，1W

S/N: 110Db (A-Weighted)

Digital processing: 24-bit ∑-Δ AD/DA converter

48KHZ sampling rate

Display: 2×20 LCD Display is used for parameters setting and function choice

Power supply: 100-240V ~ 50/60Hz

Net weight：6.5KG

Dimensions: 480×380×68mm